LIP-7004N IP Telephone Description
Quick Guide
Fixed Feature button definition
Button
Description
Used to access speed dialing, speed programming, save number redial, and last
number redial.
Speed
The DND (Do Not Disturb) feature blocks all incoming calls. When DND is active,
the red LED in this button is illuminated.
It is also used to activate call forward, e.g. to another station or voicemail. When
call forward is activated, the red LED flashes.
DND
Speaker toggles the speakerphone state, and the red LED is illuminated when
the speakerphone is active.
Speaker
Hold/Save
Flexible
This button is used to put a call on hold or save information when programming.
Some flexible buttons are pre-programmed in the system for line appearances,
loop functions etc. The remaining flexible buttons can be user-programmed.
Used in conjunction with fixed and flexible features, and the function changes in
relation to call progress, as indicated on the LCD display.
3 Soft
Buttons
This button is used to initiate a call transfer (TRS) or to enter programming mode
(PGM)
Trans/PGM
Call back
Volume
A station can initiate a call back request to a busy station. Once that station
becomes idle, the initiating station is signaled.
The volume button adjusts the audio levels for ringing, handset and
speakerphone functions.
Earphone-Jack Socket
Used to connect optional headset to the phone.
Illuminates when the phone is ringing.
Visual Ringing LED
Hands-free Microphone
Microphone is used for hands-free speakerphone function.
User Program Codes
• Press the [TRANS/PGM] button ▶ Press the flexible button to be programmed
• ▶ Press [Trans/Pgm] button again ▶ Enter the desired feature code below table
• ▶ Press the [HOLD/SAVE] button to save.
iPECS
Code
iPECS
Code
Function
Function
Display Serial number/Package for
SMEMU
-
Ring Type
7 *
1 0
1 9
1 1
1 2
2 1
2 2
2 3
-
Enblock mode
-
USB Always Record
Account Code
Ear-Mic Headset
ICM Ring
8 4
3 4
8 5
8 8
8 6
-
DID Call Wait
CO Ring
LOOP Button
COS Down
Camp-on
COS Restore
INTURSION
Walking COS
HUNT DND (group only)
KEY PAD FACILITY
ACD STATUS (group only)
PAGER CALL
COS Change
8 9
-
3 3
3 4
3 8
-
Auth. Code Register
Auth. Code Change
Mobile Ext Activation
Mobile Ext Hunt Call
Set Wake-up Time
Wake-Up Erase
-
9 1
9 2
-
CONF Button
CALLBK Button
4 1
4 2
5 3
5 4
1 4
-
DND / FWD Button
FLASH Button
9 4
9 5
9 6
9 7
-
Conf-Room Activate
Conf-Room Deactivate
Call Coverage
MUTE Button
MON Button
REDIAL Button
Call Coverage For STA XXX
Set Pre-Selected MSG
Set Customer MSG
Two Way Record
Call Log
DID RESTRICTION
DISA RESTRICTION
USB CALL RECORD
HOTDESK Agent Login
HOTDESK Agent Logout
STA Msg. Wait Retrieve
CLI/IP Msg. Wait Retrieve
Msg. Wait in Exec/Sec pair
Display Phone IP Address
Change Phone IP Address
Display Phone MAC IP Address
Change Mode
5 1
5 2
8 0
5 7
-
-
-
* 0
* *
3 1
3 2
3 5
7 5
7 6
7 7
7 8
7 9
9 3
9 8
9 9
Record User Greeting
Listen Time & Date
Listen Station Number
Listen Station Status
Record Page MSG
Erase User Greeting
Erase Page MSG
LCD Display Language
Background Music
Register Station Name
Speakerphone / Headset
Headset Ring Mode
-
-
-
-
-
-
7 1
7 3
7 4
6 1
6 2
Display Phone Version
DND Button
FWD Button
PTT Button
P/N : MMBB0000000
Important Safety Information
To prevent the unexpected danger or damage please read this information before installing and
repairing the phone. There are “Caution” and “Warning”, it means as follows;
Warning: To reduce the possibility of electric shock, do not expose your phone to high humidity areas,
such as a bathroom, swimming area, etc.
Caution: Use only LG-Nortel approved batteries and desktop chargers to avoid the damage to the phone.
Using other batteries or chargers voids your warranty and may cause an explosion.
Warning
Caution
1. Only trained and qualified service personnel shall
install, replace or service the phone.
1. Ensure that children do not pull on phone cords.
This may injure children or result in equipment
damage.
2. Do not spill liquid like water on the phone. If so,
call for the service center as this may result in
a fire or an electric shock.
2. The ear-piece houses a magnetic device which
may attract pins or small metal objects. Keep
handset clear of such objects and check before use.
3. If you see smoke or smell something during,
unplug the power cord and the phone line. Call for
service centre immediately.
3. Avoid placing the phone in an area that is dusty,
damp or subject to vibration.
4. If the power adapter is used, do not touch the plug
with wet hands. This may result in a fire or an
electric shock.
4. Choose a site that is dry and well ventilated.
5. Do not plug multiple plug-packs into one power
outlet. This may result in overheating of the plug-
packs and result in a fire or plug-pack failure.
5. Do not tug the power cord or the phone line. This
may result in a fire, an electric shock or
equipment damage.
6. Do not put the heavy things on the phone.
7. Do not drop or throw the phone.
6. Do not use the phone during a thunderstorm.
Lightning strike may result in a fire, severe
electrical or acoustic shock.
8. Static electricity discharge will damage electronic
components.
7. Do not use the power adapter if the power cord or
wall outlet are damaged. This may result in a fire 9. Keep out of direct sunlight and away from heat.
or an electric shock.
10.No user serviceable parts inside. No not insert a
screw driver or any metal objects into the phone.
This may cause electric shock or damage the
equipment and will render the warranty void.
11.Clean the phone with a soft, dry cloth only. Do not
use volatile liquids such as petrol, alcohol or
acetone as this may cause a fire or result in
discoloration or damage to plastics. Do not clean
with wax or silicon products as these may enter the
equipment and cause operation to become
unreliable.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the product
is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal
waste stream via designated collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your
city office, waste disposal service or the shop where you purchased the product.
|